日韩成人激情_欧美黑人xxx_国产一区二精品区在线_精品在线一区_97成人资源_久久久久久一区

產品分類

當前位置: 首頁 > 工業電子產品 > 無源元器件 > 電阻

類型分類:
科普知識
數據分類:
電阻

PT鉑電阻溫度傳感器與NTC熱敏電阻溫度傳感器精度,長期穩定性和重復性各自優缺點詳細對比

發布日期:2022-10-11 來源:景頌電氣 作者:景頌電氣 點擊率:606 品牌:組態王_Kingview

Platinum-RTDs (Resistance Temperature Detector) are characterized by a positive and almost linear resistance vs. temperature characteristic, clearly defined by the DIN EN60751 (IEC 60751) standard.

Positive linear resistance characteristic of Pt temperature sensors

A structured platinum meander is deposited on a ceramic substrate using a thin-film process. The Pt meander functions as a thermally sensitive resistor. The voltage drop across the sensor is measured with high precision and converted to a temperature value. Other versions of platinum RTD sensors are constructed using wire wound technology. Platinum-based sensors operate over a wide temperature range, from -196 °C to 1000 °C.

Negative and exponential resistance curve of NTCs

NTC (Negative Temperature Coefficient) thermistors are manufactured from metal oxide semiconductor ceramics, typically produced by a thick-film or compressed powder process. They feature a negative and exponential resistance change in response to temperature change. The change in resistance (voltage drop) can be converted to a temperature value. The typical operating temperature window is narrower than for Pt elements: -55 °C to +150 °C for standard epoxy-coated chip thermistors and -55 °C to +300 °C for glass-coated chip thermistors.



Pt

NTC (typical)

Characteristics Curve- Positive and nearly linear TCR
- TCR: 3850 ppm/K typical
- Characteristics standardized to DIN EN 60751
- Negative non-linear TCR
- Typical slope: -4.4 %/°C @ 25 °C
Typical Resistance Valuept100 , pt200 , pt500 , pt10002.252k @ 25 °C, 10k @ 25 °C, 20k @ 25 °C
Configurations- Elements with lead wires
- SMD packaging, SOT223, TO92
Epoxy or glass encapsulation; diode package, SMD models, other variations
CompositionPlatinum thin film meander on ceramic substrateCeramic-metal-composition
Operating Temperature Range-196 °C to 1000 °C-100 °C to 300 °C with special types up to 750 °C

Why to use a Platinum-RTD Sensor?

The Pt-RTD has a linear signal characteristic that conforms with the universally recognized DIN EN 60751 standard. This standard provides a clear definition of sensor signal output and tolerances and ensures easy sensor selection and interchangeability. In addition, it allows standardization of electronics and software. While NTCs from different manufacturers may have similar signal output, a universally recognized international standard for NTCs is not available.

Platinum sensors have a high degree of accuracy over a broad temperature range; F0.3 tolerance applies to a temperature range of -70 °C to +500 °C. NTC thermistors are available with high accuracy, but typically over much narrower temperature ranges, such as 0 °C to +70 °C. NTC manufacturers refer to a high accuracy at 25 °C, which usually contributes to a comparable small temperature range.

Temperature sensors are subjected to significant stress during use, especially at high application temperatures. Platinum, a noble metal, having the ideal properties of high-temperature capability and chemical resistance, is an ideal material for temperature sensing. Compared to NTC thermistors, platinum temperature sensors have superior drift behavior and higher long-term stability, better repeatability, and higher temperature capability.



Pt

NTC (typical)

Measurement Drift- Very low drift
- Typically 0.04 % after 1000 hours at 500 °C
Nominal resistance drift: typically 0.35 % after 100 hours at 150 °C
Accuracy- High accuracy over a wide temperature range

Defined in DIN:
- Class F 0.3 / B: ± 0,12 % (± 0.3 °C) @ 0 °C
- Class F 0.15 / A: ± 0.06 % (± 0.15 °C) @ 0 °C
- Class F 0.1 / 1/3B: ± 0.04 % (± 0.10 °C) @ 0 °C
- High accuracy over a relatively narrow temperature range
- Typical: ± 1 % @ 25 °C
Long-term StabilitySuperior long-term stability at high temperatures- Stability of NTC and requirement of the application should be matched
- Glass-coated NTCs have a higher stability than standard epoxy-coated NTCs
RepeatabilityHigh accuracy and low drift support high repeatability over a wide temperature rangeGood accuracy in limited temperature ranges, accuracy depends on lifetime and application temperature window

Platinum – the Foundation for Precise Data

Precise temperature data is the key to controlling many processes. only when the baseline situation is accurately known can it be usefully controlled and optimized.

The challenge generally lies in determining the situation under the conditions of actual use, which are often demanding. In some cases, the temperature must be measured with particular accuracy; in some cases, the temperatures are especially high or low. Sometimes both are true in the same application. Sensors may be required to withstand aggressive substances or constant stress during continuous operation.

If the environmental conditions change rapidly and markedly, the sensors must function reliably under a wide range of conditions while still delivering data of uniformly high quality. Platinum temperature sensors are generally the best choice, because they provide especially precise measurements over a broad temperature range, even under difficult conditions, and they are reliable and long-lasting.

Find out more about Heraeus platinum bars

Implications on the Entire Measurement Chain

The performance and cost of a temperature measurement element should always be considered in the context of the overall system and measurement requirements. A temperature sensor achieves the highest performance when appropriately adapted to the application environment and the signal processing electronics.

In applications with lower and narrower temperature ranges, and low accuracy requirements, the user can benefit from the high resolution of the NTC resistor. This benefit is maximized for small temperature ranges at lower temperatures, but significantly reduced at higher temperature due to the non-linear flattening of the NTC characteristic curve.

If the user has additional temperature measurement requirements, such as expanded temperature range and accuracy, additional challenges arise if NTC thermistors are used. Due to the non-linear resistance vs. temperature characteristic, more complex interconnection and signal processing electronics may be required. The linearization of the characteristic curve influences the accuracy of the overall system due to inherent linearization error, which is more pronounced for wider temperature ranges.

Due to the lack of international standards that define the functional properties of NTCs, care must be taken when replacing an installed sensor to insure compatibility. Often it requires additional and time-consuming re-calibration.

Using a Pt-RTD can eliminate this problem. The high measurement accuracy over the entire measurement range and the linear and standardized characteristic curve allows the use and design of standardized electronics.

For many applications, a recalibration after a sensor replacement is not necessary. In the long term, this can be a considerable cost factor, especially for more complex systems and sensor networks, as it keeps maintenance costs lower and optimizes operation up-times.

下一篇: PLC、DCS、FCS三大控

上一篇: 除鎳用樹脂 蘇州市蒸

推薦產品

更多
主站蜘蛛池模板: 在线看成人av | 亚洲欧美中文字幕在线观看 | 国产一区二区在线免费视频 | 国产精品18毛片一区二区 | 一级黄色片在线免费观看 | 久久综合一区二区 | 欧美日韩国产综合在线 | 精品国产成人 | 欧美va大片| 成人免费小视频 | 夜夜夜夜草| 精品乱码久久久久 | 久久精品中文字幕 | 拍真实国产伦偷精品 | 久草视 | 精品九九 | 亚洲国产精品人人爽夜夜爽 | 九九色综合 | 福利网址 | 日韩高清电影 | 福利国产 | 日韩欧美中文字幕在线视频 | 久久精品国产a三级三级三级 | 毛片在线看片 | 日韩中文字幕在线观看 | 亚洲一区二区久久久 | 国产精品亚洲精品日韩已方 | 一区二区三区四区不卡 | 国产精品视频网 | 久久久激情视频 | 国产精品久久久久久久久久久久冷 | 男女污网站 | 欧美影院| 国产精品久久亚洲 | 亚洲大片 | 综合久 | 久久av一区 | 久久免费精品视频 | 激情网站在线观看 | 午夜影院在线观看免费 | 欧美精品片 |