當前位置: 首頁 > 傳感測量產品 > 工業傳感器 > 加速度傳感器
發布日期:2022-10-09 點擊率:22
Applications: General Purpose, Machine Control, Inspection, Engine Testing
Description: The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in overange stops that are set to protect the unit against 10,000 g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range of 20 to 80°C.
Features:
Rugged Design
DC Response
10,000 g Overange Stops
Broad Temperature Range
Compact
Heavy Duty
Static and Dynamic Measurement
Frequency Response through 4000 Hz
±1% Non-Linearity
-40°C to +100°C Operating Temperature Range
10,000 g Overange Protection
典型應用: 一般應用,機械控制,檢驗,發動機測試
產品描述:
EGCS加速度傳感器的阻尼系數為0.7(標稱值),內置過載保護,確保傳感器在10,000g的沖擊下不被損壞。傳感器采用惠斯通電橋結構,溫度補償范圍為20℃~80℃,是操作環境惡劣和最初安裝過程容易出現高過載現象的小量程測量應用的理想選擇。
特點:
小尺寸堅固結構設計
靜態響應
10000g過載限位保護
靜態和動態測量
響應頻率可達4000Hz
±1%非線性
工作溫度:-40℃ ~ 100℃
EGCS加速度傳感器更多技術參數及規格書下載請瀏覽:http://www.sensorway.cn/sensors/110.html
北京賽斯維測控技術有限公司產品咨詢熱線:010-84775646,84775648。
下一篇: PLC、DCS、FCS三大控
上一篇: 傳感器助力工程機械實